Pewter Finish Dimensions: 6 1/2" x 4" These hinges are hot forged ie drawn to shape, not welded or fabricated. The hinge knuckle is fashioned in the traditional way Recommended for lighter doors eg. Airing cupboards, wardrobes. Sold in pairs and supplied with necessary fixing screws.

Pewter Finish Dimensions: 18" x 5" These 18'' hinges are recommended on full size oak plate doors. Frame plate - 1" wide for modern door lining. The knuckle on these are smaller than any other hinge. The fixing plate is narrow enough to enable it to be hung on a modern door lining and to cut the architraving over it. Sold in pairs and supplied with necessary fixing screws.

This bathroom thumb turn is designed for toilets suites and bathrooms or sometimes cupboards. It is used with item 18368 - Dead bolt and has an emergency release on the outside. It has a bolt through fixing 8mm spindle and will suit doors up to 60mm thick. 8mm spindle 54mm backplate.

Pewter. Dimensions: 1 1/2"

Pewter. Dimensions: 1 1/4"

Pewter Finish Dimensions: 4 1/2" x 1 1/4" Straight Door bolt is for use on inward opening door and comes complete with a tempered back spring. It is suitable for small cupboards and bathroom / toilet doors. The tension can be improved by inserting a large screwdriver and twisting to open the back spring. It comes complete with screws and a keep. Supplied with necessary fixing screws.

Pewter. Dimensions: 1 5/8" x 1 5/8" This escutcheon is fantastic if you are fitting separate locks to cupboards or service rooms. Supplied with necessary fixing screws.

Pewter Finish Dimensions: 7 1/2" x 2" This traditional bolt has a crafted finger push comes complete with a tempered back spring. Used for outward opening french doors. The tension can be improved by inserting a large screwdriver and twisting to open the back spring. It comes complete with screws and a keep. Supplied with necessary fixing screws.

Pewter Finish Dimensions: 7 1/2" x 2" This Door Bolt is a crafted finger push complete with a tempered back spring and is used on inward opening doors. The tension can be improved by inserting a large screwdriver and twisting to open the back spring. It comes complete with screws and a keep. Supplied with necessary fixing screws.

Pewter Finish Dimensions: 4" x 1" This ribbed shaped D handle is suitable for cupboards, doors and drawers and has been made with great skill from a single piece forming a gothic end. Available in three sizes. Supplied with necessary fixing screws.

Pewter Finish Dimensions: 6" x 1 1/2" This ribbed shaped D handle is suitable for cupboards, doors and drawers and has been made with great skill from a single piece forming a gothic end. Available in three sizes. Supplied with necessary fixing screws.

Pewter Finish Dimensions: 8" x 1 1/2" This ribbed shaped D handle is suitable for cupboards,doors and drawers and has been made with great skill from a single piece forming a gothic end. Available in three sizes. This size has the same overall length as a gothic thumb latch 33638. Supplied with necessary fixing screws

Pewter Finish Dimensions: 9 3/4" x 1 3/4" The Gothic lever latch set is part of the blacksmith's range of lever handles that is individually forged in steel on an anvil. The handles are unsprung and therefore need a very strong latch - see code 18299/2.5€. The handles come complete with both traditional screws and bolt through fixings to suit your preference. Sold as a set and supplied with necessary fixing screws.

Pewter Finish Dimensions: 9 3/4" x 1 3/4" These butt hinges can be used in conjunction with hinge fronts internally but must not be used outside. The minimum door thickness this hinge will fit on is 40mm. Sold in pairs and supplied with slotted bees waxed screws.

Pewter Finish Dimensions: 8 1/2" x 1 3/4" The Gothic thumb latch comes with a staple, keep and a decorated bar. The thumb piece passes through the door and raises the latch bar, or lifter, off the keep. To restrict the latch bar movement a staple pin is provided.These latches are one of the most evocative period pieces available to you if you are creating an authentic feel and atmosphere with your restoration project. There is a uniquely satisfying clanking sound as the thumb plate is depressed or the latch bar clicks into the notch of the keep. Each door has its own unique sound, too depending on its method of construction and quality of timber used. Over the years you'll eventually get to know each one as it's opened - and by whom - almost as if each room has been given it's own voice. Sold as a set and supplied with necessary fixing screws.

Pewter Finish Dimensions: 3 1/4" x 1 1/4" These hinges are ideal for cabinets, shutters and kitchen cupboards. Fixing is very easy as they are surface fixed with screws to the frame and the door. Sold in pairs and supplied with necessary fixing screws.

Stainless Steel Forend We modify this lock to suit our unsprung lever handle furniture making it a perfect choice for security and operational. It is a five lever, kite marked and British Standard making it insurance rated and police improved. Its deadbolt has a 22mm throw making it up to date with the new 2007 British Standard regulations. It comes with a stainless steel box stricker and all the necessary fixing screws 2 1/2"

Pewter Finish Dimensions: 12"

Pewter Finish Dimensions: 14"

Pewter. Dimensions: 6" x 2" This Lever lock set can be used with British Standard locks on external doors (ie 18238/H). Sold as a set and supplied with necessary fixing screws.

Pewter. Dimensions: 6" x 2" This Lever lock set can be used with British Standard locks on external doors (ie 18238/H). Sold as a set and supplied with necessary fixing screws.

Pewter Finish Dimensions: 3" x 6" This handle set has a delicate monkey tail. The latch set which will compliment the window fasteners. It should be used with a heavy duty latch. See code 18299/3€ as these handles are unsprung. Sold as a set and supplied with necessary fixing screws.

Pewter Finish Dimensions: overall length 12" The monkey tail stay complements the night venting fasteners and can be retro fitted on any window. It is supplied with two pins and all screws.

Pewter. Dimensions: overall length 10" The monkey tail stay complements the night venting fasteners and can be retro fitted on any window. It is supplied with two pins and all screws.

Pewter Finish Dimensions: overall length 14" The monkey tail stay complements the night venting fasteners and can be retro fitted on any window. This 12€ stay has five positions for ventilation. It is supplied with two pins and all screws.

Left Hand. Pewter. Dimensions: 6" x 1 1/2" The night vent fasteners are screw fitted, which saves time. There is no need for trickle vents. The fasteners will screw to a mullion on a 20mm flat closed positions with a large headed allen key. The nylon washer behind the handle is designed to reduce friction. Available in RH or LH Supplied with necessary fixing screws.

Pewter Finish - Right Hand Dimensions: 6" x 1 1/2" The night vent fasteners are screw fitted, which saves time. There is no need for trickle vents. The fasteners will screw to a mullion on a 20mm flat closed positions with a large headed allen key. The nylon washer behind the handle is designed to reduce friction. Available in RH or LH. Supplied with necessary fixing screws.

Pewter The oak box lock is made from solid oak with a five lever British lock. It is reversible, has excellent security and looks fantastic on that special door. It comes complete with a set of octagonal knobs and escutcheons. Sold as a set and supplied with necessary fixing screws. Dimensions: 10 1/8" x 7"

Pewter Finish Dimensions: 2 1/4" x 2 1/2" Rose: 2 5/8" Our knobs come unsprung. They are solid cast, not hollow and have loose roses to enable them to be used with a rim lock (discard one rose) or use with a mortice lock. They have treaded spindles to take adjustment for various door thicknesses and lock firmly with a grub screw. Each set comes complete with fixing screws, which are concealed for improved appearance,together with two escutcheons. For best results the centre of the knob should be a minimum of 3€ from the edge of the door. Heavy Duty latches or locks are recommended for maximum efficiency. Sold as a set and supplied with necessary fixing screws.

This bathroom thumb turn is designed for toilets suites and bathrooms or sometimes cupboards. It is used with item 18368 - Dead bolt and has an emergency release on the outside. Dimensions: 1 1/2" x 1 1/2"

Pewter. Dimensions: 1 1/2" x 1 1/2" This escutcheon is fantastic if you are fitting separate locks to cupboards or service rooms. Supplied with necessary fixing screws.

Pewter. Dimensions: 10" x 6"

Pewter. Dimensions: 6" x 5"

Pewter Finish Dimensions: plate 2 1/2" x 2 1/2" ring dia. 5" These 18'' hinges are recommended on full size oak plate doors. Frame plate - 1" wide for modern door lining. The knuckle on these are smaller than any other hinge. The fixing plate is narrow enough to enable it to be hung on a modern door lining and to cut the architraving over it. Sold in pairs and supplied with necessary fixing screws.

Pewter Finish - Left Hand. Dimensions: 5" x 1 1/2" These Pewter shepherd's crook espagnolette is an exclusive design and comes in a right and a left hand version. They can be fitted on any modern espagnolette rod or stand-alone centre lock see - 20779. They have a 7mm spindle and can be locked with a grub screw hidden under the handle. Right hand is available see code 33602. Supplied with necessary fixing screws.

Pewter Finish - Right Hand. Dimensions: 5" x 1 1/2" These Pewter shepherd's crook espagnolette is an exclusive design and comes in a right and a left hand version. They can be fitted on any modern espagnolette rod or stand-alone centre lock see - 20779. They have a 7mm spindle and can be locked with a grub screw hidden under the handle. Right hand is available see code 33603. Supplied with necessary fixing screws. Sold as a set and supplied with necessary fixing screws.

Pewter Finish Dimensions: overall length 12" The Pewter shepherds crook comes complete with two pins and screws.

Pewter Finish Dimensions: overall length 14" The Pewter shepherds crook comes complete with two pins and screws and has five positions for ventilation.

Pewter Finish Dimensions: overall length 10" The Pewter shepherds crook comes complete with two pins and screws.

2" x 3"

3" x 4"

Pewter Finish Dimensions: 11" x 1 1/2" The Tudor lever latch set is part of the blacksmith's range of lever handles that is individually forged in steel on an anvil. The handles are unsprung and therefore need a very strong latch - see code 18299/2.5€. The handles come complete with both traditional screws and bolt through fixings to suit your preference.

Pewter Finish Dimensions: 11" x 1 1/2" The Tudor lever lock set is part of the blacksmith's range of lever handles that is individually forged in steel on an anvil. The handles are unsprung and therefore need a very strong lock - see code 18238/H€. Or alternatively if you already have a weak lock the spring unit cassette code 33256 will increase its performance. The handles come complete with both traditional screws and bolt through fixings to suit your preference.